Tuesday, 20 January 2009

System Configurations

(click to enlarge images)
System Configuration Ideas
Here are some ideas on how BugModular systems may be put together - there's plenty of scope..
For more discussion, visit the new BugForum (hosted by MuffWiggler)
  1. Single Rack Bug1
    CTL1 // ENV1 // 2 x SYN2A // PRC2 // DD2 //DD1 // PRC1 // UTL2
  2. Single Rack RQuirk1
    CTL1 // ENV1 // SYN2A // SYN1 // DD2 // DD1 //PRC1 // UTL2
  3. Two Rack Bug Jan09
    Top Row: ENV1 // DD2 // SYN1 // 3 x SYN2A // PRC2 // DD2 // DD1 // UTL1
    Bottom Row: 2 x CTL1 // ENV1 // DD1 // 2 x PRC1 // UTL2
  4. Drone Machine
    Input //[Blank]// 3 x VCO //[Blank]// SV Filter // Invert // RingMod // Delay // Out Mix
  5. D/A/A/D setup
    CTL1 // 2 x ENV1 // DD2 // 2 x SYN2A // DD1 // PRC1 // UTL2
at

5 comments:

  1. DHM20 January 2009 at 00:27

    I want number three very badly indeed.

    ReplyDelete
  2. VICMOD20 January 2009 at 06:32

    yes #3 looks great. though I am not sure if I would be after delays????

    ReplyDelete
  3. Paul Birken20 January 2009 at 10:33

    3 is the magic number. Actually, any would be great to use at this point.

    ReplyDelete
  4. D/A A/D20 January 2009 at 22:34

    I get my own mention? Now that is badass!

    ReplyDelete
  5. cebec21 January 2009 at 01:31

    My single rack config would be:

    SYN1 // SYN2A // SYN2A // ENV1 // DD2 // PRC1 // PRC1 // DD1 // DD1 // UTL2

    A second rack would add one more each of the DD2 and ENV1 plus a CTL1 and PRC2.

    ReplyDelete